What should the doors to the bathroom and toilet be?
First, they must be resistant to excessive humidity. Second, appropriate sound insulation and airtightness are required. Third, the doors should be aesthetically pleasant and complement the bathroom’s interior design. Consider the opening mechanism, as well as fittings and other minor details. We have developed a guide on the choosing of internal doors for the bathroom and toilet for you that covers all of the major features of this topic.
Please, read our post and do not forget to check our YouTube channel “Grig Stamate”:
https://www.youtube.com/@GrigStamate
You will find there, thousands of designing, furnishing, and decorating ideas for your home interior and outdoors.
Allow me to mention one of them:
Small Bathrooms and Powder Rooms | Interior Design | Maximize Your Small Living Space # 15 (video)
SELECTION CRITERIA
So that you may choose the best internal door from a broad selection, you need consider the conditions that are imposed on the door leaf in the bathroom:
high-quality heat and sound insulation, which is achieved not only by the canvas itself, but also by proper installation; aesthetics; sustainability; moisture resistance – This is the canvas’s primary criterion.
If the little bathroom and shower cabin, shell, and washing machine are close to each other and within arm’s length of the front door, spray will fly on the canvas and the steam will function properly. In such instances, the most moisture-resistant material (glass and plastic) should be used. If the bathroom is large and has a decent ventilation system, your options are substantially broadened – you can consider wood paintings, chipboards, and MDF. Manufacturers claim that they can survive moisture levels ranging from 60-70%, and that MDF board is more resistant to high humidity than solid wood.
The intersection between the outside and the end of many doors is a weak point. In most cases, a protective coating is put separately on the edge and separately on the canvas, leaving a small gap between them through which moisture can pass. Furthermore, the top and bottom ends of the doors are frequently left unprotected. Moisture can readily sneak in, so if the manufacturer did not specify it, it is best to coat these areas with varnish before installation.
MATERIAL OF MANUFACTURING AND COATING OF DOORS
It is simple to assume that the material of the bathroom’s inside door determines all vital operational aspects. The abundance of options: solid wood – it is pricey, attractive, but not very practical. The material is sound and heat resistant, environmentally safe, and long-lasting with proper care. Because the tree is extremely sensitive to variations in humidity and temperature, choose the most stable type from the range. In most cases, oak and alder are used in domestic bathrooms. Other species (ash, beech, pine) necessitate more extensive processing and the application of a protective coating.
Laminated doors are artworks with an MDF, chipboard, or cheap wood (solid pine) base and a top finished with one of the following materials:
Veneer timber – This is a thin slice of natural wood that contains all of the advantages and disadvantages. This is a lovely finish with a distinct woody pattern; however, it is sensitive to dampness. It can be used in the bathroom if it is reliably coated with enamel or varnish, but it is still preferable to look for another solution; PVC film should be applied so that the completed web has no joints. In theory, each part of the door must be covered with a film in a specific room before being combined into a single construction. The chance of moisture reaching the base of MDF or cheap wood is small in this instance.
plastic entrance doors They are not afraid of wetness, temperature changes, or mold growth. These are low-cost, light-weight canvases that are simple to maintain. The door cavity is filled with polystyrene foam to improve heat and sound insulation. The biggest disadvantage is the unappealing appearance. Typically, such doors are white. Furthermore, the web can deform under greater or less severe loads, among other factors.
Doors made of glass. Only inserts in the door can be made of glass, but the entire canvas can also be produced. Tempered glass is utilized, which might be frosted, corrugated, tinted, or stained.
Other related posts from our website:
https://howtobuildahouseblog.com/bathroom-interior-new-and-creative-tips-and-ideas/
https://howtobuildahouseblog.com/paint-the-tiles-renew-the-bathroom-quickly-and-affordably/
Thank you so much for your attention.
Stay tuned. We will upload many other amazing posts to our website and videos onto our YouTube channel.
Thank you so much.
for your time and attention.
Best Regards
See you to another post,
Bye, Bye